Streaming Benchmarks

This package provides micro-benchmarks to measure and compare the performance of various streaming implementations in Haskell.

We have taken due to care to make sure that we are benchmarking correctly and fairly. See the notes on correct benchmarking.

DISCLAIMER: This package is a result of benchmarking effort done during the development of streamly by the authors of streamly.

Benchmarks

The benchmark names are obvious, some of them are described below. Single operation benchmarks:

Name	Description
drain	Just discards all the elements in the stream
drop-all	drops all element using the drop operation
last	extract the last element of the stream
fold	sum all the numbers in the stream
map	increments each number in the stream by 1
take-all	Use take to retain all the elements in the stream
filter-even	Keep even numbers, discard odd
scan	scan the stream using + operation
mapM	transform the stream using a monadic action
zip	combines corresponding elements of the two streams together

Composite operation benchmarks:

Name	Description
map x 4	perform map operation 4 times
take-map	take followed by a map

For more details on how each benchmark is implemented see this benchmark file.

Each benchmark is run in a separate process to avoid any effects of GC interference and sharing across benchmarks.

Benchmark Results

Below we present some results comparing streamly with other streaming implementations. Due care has been taken to keep the comparisons fair. We have optimized each library's code to the best of our knowledge, please point out if you find any measurement issues.

Reproducing benchmark results

Commands to reproduce the benchmark results are provided in each section below. But before you run those commands you need to build the reporting tool once using the following command. Note that this command works with only ghc-8.8.4 or lower. However, after building this tool you can run the benchmarks with any GHC version.

$ cabal install --flag dev --installdir charts --with-compiler ghc-8.8.4 bench-report

Nix users can use bench-report.nix. It uses an older version of nixpkgs that contains the required dependencies:

$ nix-shell bench-report.nix --run "cabal install --flag dev --installdir charts bench-report"

Streamly vs Haskell Lists

Streamly, when used with Identity monad, is almost the same as Haskell lists (in the base package). See this for more details.

The following table compares the timing of several operations for streamly with lists using a one million element stream. For brevity only those operations where the performance of the two packages differ by more than 10% are shown in the table below.

Benchmark	streamly(μs)	list(μs)	list/streamly
drop-map x 4	375.09	76925.32	205.08
filter-drop x 4	382.03	54848.54	143.57
drop-scan x 4	795.81	76716.79	96.40
filter-scan x 4	795.60	44559.15	56.01
scan-map x 4	1192.19	48838.22	40.97
take-map x 4	1500.99	60126.58	40.06
filter-take x 4	1502.01	48766.87	32.47
take-drop x 4	1499.62	41720.03	27.82
take-scan x 4	1874.94	51283.30	27.35
drop-one x 4	375.33	8993.87	23.96
dropWhile-false x 4	374.61	8957.79	23.91
dropWhile-false	374.83	8670.05	23.13
drop-one	390.77	8681.85	22.22
dropWhile-true	571.60	12237.48	21.41
drop-all	562.94	8262.38	14.68
take-all	624.83	564.34	1/1.11
scan x 4	795.83	385.85	1/2.06
appendR[10000]	360.75	126.95	1/2.84
concatMap	34957.71	1124.85	1/31.08

• streamly-0.8.0, base-4.14.1.0, ghc-8.10.4, Linux

To reproduce these results use the following commands:

$ ./bench.sh --benchmarks "pure-streamly,list" --measure
$ ./bench.sh --benchmarks "pure-streamly,list" --diff multiples

Streamly vs Streaming

The following table compares the timing of several operations for streamly with streaming using a million element stream.

Benchmark	streamly(μs)	streaming(μs)	streaming/streamly
appendR[10000]	326.56	1301176.69	3984.54
mapM x 4	374.42	223591.08	597.17
filter-map x 4	381.07	194903.88	511.47
filter-scan x 4	795.66	233527.90	293.50
filter-all-in x 4	375.40	102629.64	273.38
filter-drop x 4	387.15	99096.98	255.96
map x 4	386.49	94944.87	245.66
drop-map x 4	375.62	89669.37	238.73
scan x 4	797.00	166332.40	208.70
scan-map x 4	1194.30	238804.48	199.95
filter-even x 4	396.37	77865.47	196.45
drop-scan x 4	796.98	156063.52	195.82
takeWhile-true x 4	562.49	90183.53	160.33
scan	375.24	47520.57	126.64
filter-take x 4	1498.55	189635.34	126.55
mapM	388.10	46689.61	120.30
take-map x 4	1500.71	178954.50	119.25
zip	656.65	66689.73	101.56
take-scan x 4	2380.35	241675.75	101.53
filter-all-in	375.97	33590.14	89.34
map	375.02	33081.13	88.21
filter-even	393.26	30458.46	77.45
filter-all-out	382.87	26826.21	70.07
take-all x 4	1499.71	101332.53	67.57
take-drop x 4	1498.53	98281.99	65.59
takeWhile-true	562.62	31863.25	56.63
foldl'	388.22	18503.15	47.66
drop-all	562.08	25200.32	44.83
take-all	768.65	33247.97	43.26
dropWhile-true	564.87	24431.50	43.25
last	385.53	15240.85	39.53
dropWhile-false	374.83	14566.70	38.86
drop-one	374.80	14565.01	38.86
drop-one x 4	375.88	14448.67	38.44
dropWhile-false x 4	390.12	14619.42	37.47
drain	375.06	13702.29	36.53
toList	117708.83	201444.81	1.71

• streamly-0.8.0, streaming-0.2.3.0, ghc-8.10.4, Linux

To reproduce these results use the following commands:

$ ./bench.sh --benchmarks "streamly,streaming" --measure
$ ./bench.sh --benchmarks "streamly,streaming" --diff multiples

Streamly vs Pipes

The following table compares the timing of several operations for streamly with pipes using a million element stream.

Benchmark	streamly(μs)	pipes(μs)	pipes/streamly
appendR[10000]	327.90	901135.92	2748.21
mapM x 4	375.20	407184.39	1085.23
filter-map x 4	381.52	366759.70	961.31
drop-map x 4	375.48	281296.82	749.16
filter-all-in x 4	375.60	222331.68	591.93
filter-drop x 4	387.44	222830.71	575.14
drop-scan x 4	797.23	336737.89	422.39
filter-even x 4	389.87	152688.91	391.64
filter-scan x 4	797.38	309733.91	388.44
drop-one x 4	375.48	139851.13	372.46
map x 4	386.56	136289.32	352.57
dropWhile-false x 4	390.72	137395.44	351.65
scan-map x 4	1194.38	381286.88	319.23
takeWhile-true x 4	562.86	165143.23	293.40
scan x 4	796.68	222986.17	279.90
mapM	388.19	95576.97	246.21
filter-all-in	375.21	71297.42	190.02
take-map x 4	1502.76	275887.24	183.59
scan	374.81	65549.13	174.89
take-drop x 4	1503.43	256448.45	170.58
filter-even	390.29	66183.72	169.57
filter-all-out	376.99	59074.54	156.70
drop-one	375.19	58395.24	155.64
dropWhile-false	375.35	58223.03	155.12
map	375.05	57736.43	153.94
filter-take x 4	1503.00	227925.71	151.65
take-scan x 4	2455.91	354284.33	144.26
zip	657.07	86011.93	130.90
takeWhile-true	564.14	61390.21	108.82
take-all x 4	1502.32	139730.70	93.01
dropWhile-true	564.03	49227.19	87.28
drop-all	562.05	46505.37	82.74
take-all	824.09	60511.34	73.43
drain	375.29	26390.59	70.32
foldl'	397.34	19064.05	47.98
last	387.11	17364.44	44.86
toList	117257.09	207405.94	1.77

• streamly-0.8.0, pipes-4.3.16, ghc-8.10.4, Linux

To reproduce these results use the following commands:

$ ./bench.sh --benchmarks "streamly,pipes" --measure
$ ./bench.sh --benchmarks "streamly,pipes" --diff multiples

Streamly vs Conduit

The following table compares the timing of several operations for streamly with conduit using a million element stream.

Benchmark	streamly(μs)	conduit(μs)	conduit/streamly
mapM x 4	375.46	297002.31	791.04
filter-map x 4	380.79	267543.81	702.60
drop-map x 4	375.66	232307.84	618.39
filter-drop x 4	386.05	235029.15	608.81
filter-scan x 4	796.56	306556.67	384.85
drop-scan x 4	797.19	300789.06	377.31
zip	657.29	210069.05	319.60
filter-all-in x 4	375.24	118506.68	315.82
scan-map x 4	1194.67	360671.18	301.90
map x 4	387.00	113497.14	293.27
drop-one x 4	375.49	101842.95	271.23
dropWhile-false x 4	389.44	102051.22	262.04
scan x 4	796.72	190479.35	239.08
takeWhile-true x 4	564.58	114459.57	202.73
filter-even x 4	391.76	72369.30	184.73
filter-take x 4	1502.04	267921.27	178.37
take-map x 4	1502.88	238875.95	158.95
take-drop x 4	1500.34	232606.19	155.04
take-scan x 4	2443.83	309738.86	126.74
mapM	389.15	41897.48	107.66
scan	375.40	38137.85	101.59
take-all x 4	1502.32	110682.74	73.67
filter-all-in	375.31	26024.21	69.34
dropWhile-false	375.10	25307.13	67.47
map	375.18	23088.09	61.54
drop-one	375.43	22020.65	58.65
filter-even	392.28	21504.28	54.82
takeWhile-true	562.79	29012.68	51.55
filter-all-out	378.76	15736.05	41.55
drop-all	562.89	19916.48	35.38
foldl'	388.88	12499.03	32.14
dropWhile-true	564.43	17983.35	31.86
take-all	784.67	24425.36	31.13
last	385.75	10974.84	28.45
drain	375.18	4272.15	11.39
appendR[10000]	326.93	1207.88	3.69
toList	116441.26	199138.09	1.71

• streamly-0.8.0, conduit-1.3.4.1, ghc-8.10.4, Linux

To reproduce these results use the following commands:

$ ./bench.sh --benchmarks "streamly,conduit" --measure
$ ./bench.sh --benchmarks "streamly,conduit" --diff multiples

Comparing other libraries

This package supports many streaming libraries. Use the following command to see all available benchmarks:

$ ./bench.sh --help

You can then select the libraries you want to compare:

$ ./bench.sh --benchmarks "streaming,pipes" --measure

Adding New Libraries

It is trivial to add a new package. This is how a benchmark file for a streaming package looks like. Pull requests are welcome, we will be happy to help, just join the gitter chat and ask!