@hackage termonad0.2.1.0

Terminal emulator configurable in Haskell

Termonad

Build Status Hackage Stackage LTS Stackage Nightly BSD3 license

Termonad is a terminal emulator configurable in Haskell. It is extremely customizable and provides hooks to modify the default behavior. It can be thought of as the "XMonad" of terminal emulators.

image of Termonad

Table of Contents

Installation

Termonad can be installed on any system as long as the necessary GTK libraries are available. The following are instructions for installing Termonad on a few different distributions and systems. If the given steps don't work for you, or you want to add instructions for an additional system, please send a pull request.

The following steps use the stack build tool to build Termonad, but cabal can be used as well. Steps for installing stack can be found on this page.

Arch Linux

First, you must install the required GTK system libraries:

$ pacman -S vte3

In order to install Termonad, clone this repository and run stack install. This will install the termonad binary to ~/.local/bin/:

$ git clone https://github.com/cdepillabout/termonad
$ cd termonad/
$ stack install

Ubuntu / Debian

First, you must install the required GTK system libraries:

$ apt-get install gobject-introspection libgirepository1.0-dev libgtk-3-dev libvte-2.91-dev

In order to install Termonad, clone this repository and run stack install. This will install the termonad binary to ~/.local/bin/:

$ git clone https://github.com/cdepillabout/termonad
$ cd termonad/
$ stack install

NixOS

There are two methods to build Termonad on NixOS.

The first is using stack. The following commands install stack for your user, clone this repository, and install the termonad binary to ~/.local/bin/:

$ nix-env -i stack
$ git clone https://github.com/cdepillabout/termonad
$ cd termonad/
$ stack --nix install

The second is using the normal nix-build machinery. The following commands clone this repository and build the termonad binary at ./result/bin/:

$ git clone https://github.com/cdepillabout/termonad
$ cd termonad/
$ nix-build

Mac OS X

(currently no instructions available. please send a PR adding instructions if you get termonad to build.)

Windows

(currently no instructions available. please send a PR adding instructions if you get termonad to build.)

How to use Termonad

Termonad is similar to XMonad. The above steps will install a termonad binary somewhere on your system. If you have installed Termonad using stack, the termonad binary will be in ~/.local/bin/. This binary is a version of Termonad configured with default settings. You can try running it to get an idea of what Termonad is like:

$ ~/.local/bin/termonad

If you would like to configure termonad with your own settings, first you will need to create a Haskell file called ~/.config/termonad/termonad.hs. The next section gives an example configuration file.

If this file exists, when the ~/.local/bin/termonad binary launches, it will try to compile it. If it succeeds, it will create a separate binary file called something like ~/.cache/termonad/termonad-linux-x86_64. This binary file can be thought of as your own personal Termonad, configured with all your own settings.

When you run ~/.local/bin/termonad, it will re-exec ~/.cache/termonad/termonad-linux-x86_64 if it exists.

However, there is one difficulty with this setup. In order for the ~/.local/bin/termonad binary to be able to compile your ~/.config/termonad/termonad.hs file, it needs to know where GHC is, as well as where all your Haskell packages live. This presents some difficulties that will be discussed in a following section.

Configuring Termonad

The following is an example Termonad configuration file. You should save this to ~/.config/termonad/termonad.hs. You can find more information on the available configuration options within the Termonad.Config module.

{-# LANGUAGE OverloadedStrings #-}

module Main where

import Data.Colour.SRGB (Colour, sRGB24)
import Termonad.App (defaultMain)
import Termonad.Config
  ( FontConfig, ShowScrollbar(ShowScrollbarAlways), cursorColor
  , defaultFontConfig, defaultTMConfig, fontConfig, fontFamily
  , fontSize, showScrollbar
  )

-- | This sets the color of the cursor in the terminal.
--
-- This uses the "Data.Colour" module to define a dark-red color.
-- There are many default colors defined in "Data.Colour.Names".
cursColor :: Colour Double
cursColor = sRGB24 204 0 0

-- | This defines the font for the terminal.
fontConf :: FontConfig
fontConf =
  defaultFontConfig
    { fontFamily = "DejaVu Sans Mono"
    , fontSize = 13
    }

main :: IO ()
main = do
  let termonadConf =
        defaultTMConfig
          { cursorColor = cursColor
          , fontConfig = fontConf
          , showScrollbar = ShowScrollbarAlways
          }
  defaultMain termonadConf

Compiling Local Settings

If you lauch Termonad by calling ~/.local/bin/termonad, it will try to compile the ~/.config/termonad/termonad.hs file if it exists. The problem is that ~/.local/bin/termonad needs to be able to see GHC and the required Haskell libraries to be able to compile ~/.config/termonad/termonad.hs.

There are a couple solutions to this problem, listed in the sections below.

(These steps are definitely confusing, and I would love to figure out a better way to do this. Please submit an issue or PR if you have a good idea about how to fix this.)

Running with stack

If you originally compiled Termonad with stack, you can use stack to execute Termonad. First, you must change to the directory with the Termonad source code. From there, you can run stack exec:

$ cd termonad/  # change to the termonad source code directory
$ stack exec -- termonad

stack will pick up the correct GHC version and libraries from the stack.yaml and termonad.cabal file. termonad will be run in an environment with GHC available. termonad will use this GHC and libraries to compile your ~/.config/termonad/termonad.hs file. It if succeeds, it should create a ~/.cache/termonad/termonad-linux-x86_64 binary.

If you need extra Haskell libraries available when compiling your ~/.config/termonad/termonad.hs file, you can specify them to stack exec:

$ stack exec --package lens --package conduit -- termonad

The problem with this is that stack exec changes quite a few of your environment variables. It is not recommended to actually run Termonad from within stack exec. After you run stack exec -- termonad and let it recompile your ~/.config/termonad/termonad.hs file, exit Termonad. Re-run Termonad by calling it directly. Termonad will notice that ~/.config/termonad/termonad.hs hasn't changed since ~/.cache/termonad/termonad-linux-x86_64 has been recompiled, so it will directly execute ~/.cache/termonad/termonad-linux-x86_64.

Running with nix

If you originally compiled Termonad with nix, you can use nix to create an environment with GHC and specified Haskell libraries available.

There is a .nix file available you can use to do this:

.nix-helpers/running-termonad.nix

This file will give us an environment with termonad, GHC, and a few Haskell libraries installed. You can enter this environment using nix-shell:

$ cd termonad/  # change to the termonad source code directory
$ nix-shell ./.nix-helpers/running-termonad.nix

From within this environment, you can run termonad. It will find the ~/.config/termonad/termonad.hs file and compile it, outputting the .cache/termonad/termonad-linux-x86_64 binary. Termonad will then re-exec this binary.

The problem with this is that nix-shell may change your environment variables in ways you do not want. I recommend running termonad to get it to recompile your ~/.config/termonad/termonad.hs file, then exit the nix-shell environment and rerun Termonad by calling it directly. Termonad will notice that ~/.config/termonad/termonad.hs hasn't been changed since ~/.cache/termonad/termonad-linux-x86_64 has been recompiled, so it will directly execute ~/.cache/termonad/termonad-linux-x86_64.

Goals

Termonad has the following goals:

  • fully configurable in Haskell

    There are already many good terminal emulators. However, there are no terminal emulators fully configurable in Haskell. Termonad fills this niche.

  • flexible

    Most people only need a terminal emulator that lets you change the font-size, cursor color, etc. They don't need tons of configuration options. Termonad should be for people that like lots of configuration options. Termonad should provide many hooks to allow the user to change it's behavior.

  • stable

    Termonad should be able to be used as everyday as your main terminal emulator. It should not crash for any reason. If you experience a crash, please file an issue or a pull request!

  • good documentation

    The documentation for Termonad on Hackage should be good. You shouldn't have to guess at what certain data types or functions do. If you have a hard time understanding anything in the documentation, please submit an issue or PR.

Contributions

Contributions are highly appreciated. Termonad is currently missing many helpful configuration options and behavior hooks. If there is something you would like to add, please submit an issue or PR.

Maintainers