Changelog of @hackage/megaparsec 5.1.1

Megaparsec 5.1.1

  • Exported the observing primitive from Text.Megaparsec.

Megaparsec 5.1.0

  • Defined displayException for ParseError, so exceptions are displayed in human-friendly form now. This works with GHC 7.10 and later.

  • Line comments parsed by skipLineComment now may end at the end of input and do not necessarily require a newline to be parsed correctly. See #119.

  • Exposed parseErrorTextPretty function in Text.Megaparsec.Error to allow to render ParseErrors without stack of source positions.

  • Eliminated the old-tests test suite — Parsec legacy. The cases that are not already obviously covered in the main test suite were included into it.

  • Added Arbitrary instances for the following data types: Pos, SourcePos, ErrorItem, Dec, ParseError and State. This should make testing easier without the need to add orphan instances every time. The drawback is that we start to depend on QuickCheck, but that's a fair price.

  • The test suite now uses the combination of Hspec and the hpesc-megaparsec package, which also improved the latter (that package is the recommended way to test Megaparsec parsers).

  • The try combinator now truly backtracks parser state when its argument parser fails (either consuming input or not). Most users will never notice the difference though. See #142.

  • Added the dbg function that should be helpful for debugging.

  • Added observing primitive combinator that allows to “observe” parse errors without ending parsing (they are returned in Left, while normal results are wrapped in Right).

  • Further documentation improvements.

Megaparsec 5.0.1

  • Derived NFData instances for Pos, InvalidPosException, SourcePos, ErrorItem, Dec, ParseError, and State.

  • Derived Data instance for ParseError, Data and Typeable instances for SourcePos and State.

  • Minor documentation improvements.

Megaparsec 5.0.0

General changes

  • Removed parseFromFile and StorableStream type-class that was necessary for it. The reason for removal is that reading from file and then parsing its contents is trivial for every instance of Stream and this function provides no way to use newer methods for running a parser, such as runParser'. So, simply put, it adds little value and was included in 4.x versions for compatibility reasons.

  • Moved position-advancing function from arguments of token and tokens functions to Stream type class (named updatePos). The new function allows to handle custom streams of tokens where every token contains information about its position in stream better (for example when stream of tokens is produced with happy/alex).

  • Support for include files (stack of positions instead of flat position) added. The new functions pushPosition and popPosition can be used to move “vertically” in the stack of positions. getPosition and setPosition still work on top (“current file”) level, but user can get full stack via getParserState if necessary. Note that ParseError and pretty-printing for it also support the new feature.

  • Added type function Token associated with Stream type class. The function returns type of token corresponding to specific token stream.

  • Type ParsecT (and also type synonym Parsec) are now parametrized over type of custom component in parse errors.

  • Parameters of MonadParsec type class are: e — type of custom component in parse errors, s — type of input stream, and m — type of underlying monad.

  • Type of failure primitive combinator was changed, now it accepts three arguments: set of unexpected items, set of expected items, and set of custom data.

  • Type of token primitive combinator was changed, now in case of failure a triple-tuple is returned with elements corresponding to arguments of failure primitive. The token primitive can also be optionally given an argument of token type to use in error messages (as expected item) in case of end of input.

  • unexpected combinator now accepts argument of type ErrorItem instead of plain String.

  • General performance improvements and improvements in speed of some combinators, manyTill in particular.

Error messages

  • The module Text.Megaparsec.Pos was completely rewritten. The new module uses Pos data type with smart constructors to ensure that things like line and column number can be only positive. SourcePos on the other hand does not require smart constructors anymore and its constructors are exported. Show and Read instances of SourcePos are derived and pretty-printing is done with help of sourcePosPretty function.

  • The module Text.Megaparsec.Error was completely rewritten. A number of new types and type-classes are introduced: ErrorItem, Dec, ErrorComponent, and ShowErrorComponent. ParseError does not need smart constructors anymore and its constructor and field selectors are exported. It uses sets (from the containers package) instead of sorted lists to enumerate unexpected and expected items. The new definition is also parametrized over token type and custom data type which can be passed around as part of parse error. Default “custom data” component is Dec, which see. All in all, we have completely well-typed and extensible error messages now. Show and Read instances of ParseError are derived and pretty-printing is done with help of parseErrorPretty.

  • The module Text.Megaparsec.ShowToken was eliminated and type class ShowToken was moved to Text.Megaparsec.Error. The only method of that class in now named showTokens and it works on streams of tokens, where single tokes are represented by NonEmpty list with single element.

Built-in combinators

  • Combinators oneOf, oneOf', noneOf, and noneOf' now accept any instance of Foldable, not only String.

Lexer

  • Error messages about incorrect indentation levels were greatly improved. Now every such message contains information about desired ordering between “reference” indentation level and actual indentation level as well as values of these levels. The information is stored in ParseError in well-typed form and can be pretty-printed when necessary. As part of this improvement, type of indentGuard was changed.

  • incorrectIndent combinator is introduced in Text.Megaparsec.Lexer module. It allows to fail with detailed information regarding incorrect indentation.

  • Introduced scientific parser that can parse arbitrary big numbers without error or memory overflow. float still returns Double, but it's defined in terms of scientific now. Since Scientific type can reliably represent integer values as well as floating point values, number now returns Scientific instead of Either Integer Double (Integer or Double can be extracted from Scientific value anyway). This in turn makes signed parser more natural and general, because we do not need ad-hoc Signed type class anymore.

  • Added skipBlockCommentNested function that should help parse possibly nested block comments.

  • Added lineFold function that helps parse line folds.

Megaparsec 4.4.0

  • Now state returned on failure is the exact state of parser at the moment when it failed, which makes incremental parsing feature much better and opens possibilities for features like “on-the-fly” recovering from parse errors.

  • The count combinator now works with Applicative instances (previously it worked only with instances of Alternative). It's now also faster.

  • tokens and parsers built upon it (such as string and string') backtrack automatically on failure now, that is, when they fail, they never consume any input. This is done to make their consumption model match how error messages are reported (which becomes an important thing as user gets more control with primitives like withRecovery). This means, in particular, that it's no longer necessary to use try with tokens-based parsers. This new feature does not affect performance in any way.

  • New primitive parser withRecovery added. The parser allows to recover from parse errors “on-the-fly” and continue parsing. Once parsing is finished, several parse errors may be reported or ignored altogether.

  • eitherP combinator added.

  • Removed Enum instance of Message type. This was Parsec's legacy that we should eliminate now. Message does not constitute enumeration, toEnum was never properly defined for it. The idea to use fromEnum to determine type of Message is also ugly, for this purpose new functions isUnexpected, isExpected, and isMessage are defined in Text.Megaparsec.Error.

  • Minor tweak in signature of MonadParsec type class. Collection of constraints changed from Alternative m, Monad m, Stream s t to Alternative m, MonadPlus m, Stream s t. This is done to make it easier to write more abstract code with older GHC where such primitives as guard are defined for instances of MonadPlus, not Alternative.

Megaparsec 4.3.0

  • Canonicalized Applicative/Monad instances. Thanks to Herbert Valerio Riedel.

  • Custom messages in ParseError are printed each on its own line.

  • Now accumulated hints are not used with ParseError records that have only custom messages in them (created with Message constructor, as opposed to Unexpected or Expected). This strips “expected” line from custom error messages where it's unlikely to be relevant anyway.

  • Added higher-level combinators for indentation-sensitive grammars: indentLevel, nonIndented, and indentBlock.

Megaparsec 4.2.0

  • Made newPos constructor and other functions in Text.Megaparsec.Pos smarter. Now it's impossible to create SourcePos with non-positive line number or column number. Unfortunately we cannot use Numeric.Natural because we need to support older versions of base.

  • ParseError is now a monoid. mergeError is used as mappend.

  • Added functions addErrorMessages and newErrorMessages to add several messages to existing error and to construct error with several attached messages respectively.

  • parseFromFile now lives in Text.Megaparsec.Prim. Previously we had 5 nearly identical definitions of the function, varying only in type-specific readFile function. Now the problem is solved by introduction of StorableStream type class. All supported stream types are instances of the class out of box and thus we have polymorphic version of parseFromFile.

  • ParseError is now instance of Exception (and Typeable).

  • Introduced runParser' and runParserT' functions that take and return parser state. This makes it possible to partially parse input, resume parsing, specify non-standard initial textual position, etc.

  • Introduced failure function that allows to fail with arbitrary collection of messages. unexpected is now defined in terms of failure. One consequence of this design decision is that failure is now method of MonadParsec, while unexpected is not.

  • Removed deprecated combinators from Text.Megaparsec.Combinator:

    • chainl
    • chainl1
    • chainr
    • chainr1

  • number parser in Text.Megaparsec.Lexer now can be used with signed combinator to parse either signed Integer or signed Double.

Megaparsec 4.1.1

  • Fixed bug in implementation of sepEndBy and sepEndBy1 and removed deprecation notes for these functions.

  • Added tests for sepEndBy and sepEndBy1.

Megaparsec 4.1.0

  • Relaxed dependency on base, so that minimal required version of base is now 4.6.0.0. This allows Megaparsec to compile with GHC 7.6.x.

  • Text.Megaparsec and Text.Megaparsec.Prim do not export data types Consumed and Reply anymore because they are rather low-level implementation details that should not be visible to end-user.

  • Representation of file name and textual position in error messages was made conventional.

  • Fixed some typos is documentation and other materials.

Megaparsec 4.0.0

General changes

  • Renamed many1 → some as well as other parsers that had many1 part in their names.

  • The following functions are now re-exported from Control.Applicative: (<|>), many, some, optional. See #9.

  • Introduced type class MonadParsec in the style of MTL monad transformers. Eliminated built-in user state since it was not flexible enough and can be emulated via stack of monads. Now all tools in Megaparsec work with any instance of MonadParsec, not only with ParsecT.

  • Added new function parseMaybe for lightweight parsing where error messages (and thus file name) are not important and entire input should be parsed. For example it can be used when parsing of single number according to specification of its format is desired.

  • Fixed bug with notFollowedBy always succeeded with parsers that don't consume input, see #6.

  • Flipped order of arguments in the primitive combinator label, see #21.

  • Renamed tokenPrim → token, removed old token, because tokenPrim is more general and original token is little used.

  • Made token parser more powerful, now its second argument can return Either [Message] a instead of Maybe a, so it can influence error message when parsing of token fails. See #29.

  • Added new primitive combinator hidden p which hides “expected” tokens in error message when parser p fails.

  • Tab width is not hard-coded anymore. It can be manipulated via getTabWidth and setTabWidth. Default tab-width is defaultTabWidth, which is 8.

Error messages

  • Introduced type class ShowToken and improved representation of characters and strings in error messages, see #12.

  • Greatly improved quality of error messages. Fixed entire Text.Megaparsec.Error module, see #14 for more information. Made possible normal analysis of error messages without “render and re-parse” approach that previous maintainers had to practice to write even simplest tests, see module Utils.hs in old-tests for example.

  • Reduced number of Message constructors (now there are only Unexpected, Expected, and Message). Empty “magic” message strings are ignored now, all the library now uses explicit error messages.

  • Introduced hint system that greatly improves quality of error messages and made code of Text.Megaparsec.Prim a lot clearer.

Built-in combinators

  • All built-in combinators in Text.Megaparsec.Combinator now work with any instance of Alternative (some of them even with Applicaitve).

  • Added more powerful count' parser. This parser can be told to parse from m to n occurrences of some thing. count is defined in terms of count'.

  • Removed optionMaybe parser, because optional from Control.Applicative does the same thing.

  • Added combinator someTill.

  • These combinators are considered deprecated and will be removed in future:

    • chainl
    • chainl1
    • chainr
    • chainr1
    • sepEndBy
    • sepEndBy1

Character parsing

  • Renamed some parsers:

    • alphaNum → alphaNumChar
    • digit → digitChar
    • endOfLine → eol
    • hexDigit → hexDigitChar
    • letter → letterChar
    • lower → lowerChar
    • octDigit → octDigitChar
    • space → spaceChar
    • spaces → space
    • upper → upperChar

  • Added new character parsers in Text.Megaparsec.Char:

    • asciiChar
    • charCategory
    • controlChar
    • latin1Char
    • markChar
    • numberChar
    • printChar
    • punctuationChar
    • separatorChar
    • symbolChar

  • Descriptions of old parsers have been updated to accent some Unicode-specific moments. For example, old description of letter stated that it parses letters from “a” to “z” and from “A” to “Z”. This is wrong, since it used Data.Char.isAlpha predicate internally and thus parsed many more characters (letters of non-Latin languages, for example).

  • Added combinators char', oneOf', noneOf', and string' which are case-insensitive variants of char, oneOf, noneOf, and string respectively.

Lexer

  • Rewritten parsing of numbers, fixed #2 and #3 (in old Parsec project these are number 35 and 39 respectively), added per bug tests.

    • Since Haskell report doesn't say anything about sign, integer and float now parse numbers without sign.

    • Removed natural parser, it's equal to new integer now.

    • Renamed naturalOrFloat → number — this doesn't parse sign too.

    • Added new combinator signed to parse all sorts of signed numbers.

  • Transformed Text.Parsec.Token into Text.Megaparsec.Lexer. Little of Parsec's code remains in the new lexer module. New module doesn't impose any assumptions on user and should be vastly more useful and general. Hairy stuff from original Parsec didn't get here, for example built-in Haskell functions are used to parse escape sequences and the like instead of trying to re-implement the whole thing.

Other

  • Renamed the following functions:

    • permute → makePermParser
    • buildExpressionParser → makeExprParser

  • Added comprehensive QuickCheck test suite.

  • Added benchmarks.

Parsec 3.1.9

  • Many and various updates to documentation and package description (including the homepage links).

  • Add an Eq instance for ParseError.

  • Fixed a regression from 3.1.6: runP is again exported from module Text.Parsec.

Parsec 3.1.8

  • Fix a regression from 3.1.6 related to exports from the main module.

Parsec 3.1.7

  • Fix a regression from 3.1.6 related to the reported position of error messages. See bug #9 for details.

  • Reset the current error position on success of lookAhead.

Parsec 3.1.6

  • Export Text instances from Text.Parsec.

  • Make Text.Parsec exports more visible.

  • Re-arrange Text.Parsec exports.

  • Add functions crlf and endOfLine to Text.Parsec.Char for handling input streams that do not have normalized line terminators.

  • Fix off-by-one error in Token.charControl.

Parsec 3.1.4 & 3.1.5

  • Bump dependency on text.

Parsec 3.1.3

  • Fix a regression introduced in 3.1.2 related to positions reported by error messages.