Revision history for lsp

2.6.0.0

• Progress reporting now has a configurable start delay and update delay. This allows servers to set up progress reporting for any operation and not worry about spamming the user with extremely short-lived progress sessions.

2.5.0.0

• The server will now reject messages sent after shutdown has been received.
• There is a shutdownBarrier member in the server state which can be used to conveniently run actions when shutdown is triggered.

2.4.0.0

• Server-created progress now will not send reports until and unless the client confirms the progress token creation.
• Progress helper functions now can take a progress token provided by the client, so client-initiated progress can now be supported properly.
• The server options now allow the user to say whether the server should advertise support for client-initiated progress or not.
• The server now dynamically registers for workspace/didChangeConfiguration notifications, to ensure that newer clients continue to send them.
• Removed getCompletionPrefix from the VFS module. This is specific to completing Haskell identifiers and doesn't belong here. It has already been moved to ghcide some time ago.

2.3.0.0

• Fix inference of server capabilities for newer methods (except notebook methods).
• VFS no longer requires IO to initialize, functions that wrote to a temporary directory now take the directory as an argument.

2.2.0.0

• Many changes relating to client configuration
  • lsp now sends workspace/configuration requests in response to intialized and workspace/didChangeConfiguration requests. It still attempts to parse configuration from intializationOptions and workspace/didChangeConfiguration as a fallback.
  • Servers must provide a configuration section for use in workspace/configuration.
  • parseConfig will now be called on the object corresponding to the configuration section, not the whole object.
  • New callback for when configuration changes, to allow servers to react.
• The logging of messages sent by the protocol has been disabled, as this can prove troublesome for servers that log these to the client: https://github.com/haskell/lsp/issues/447

2.1.0.0

• Fix handling of optional methods.
• staticHandlers now takes the client capabilities as an argument. These are static across the lifecycle of the server, so this allows a server to decide at construction e.g. whether to provide handlers for resolve methods depending on whether the client supports it.

2.0.0.0

• Support lsp-types-2.0.0.0.

1.6.0.0

• Pinned to lsp-types 1.6
• Tests moved to lsp-types

1.5.0.0

• VFS module moved to lsp from lsp-types.
• Logging reworked to use co-log-core instead of hslogger.

1.4.0.0

• Fix extraneous asdf in withProgress output (#372) (@heitor-lassarote)
• Use appropriate number types (#366) (@michaelpj)

1.2.0.1

• Add exception instances to LspT (#315) (@pepeiborra)
• Add call hierarchy support (@July541)
• Fix build on GHC 9 (@anka-213)
• pass the lspConfig at initialization time as well (@pepeiborra)
• Semantic token (@michaelpj)
• Do not crash on workspace/didChangeConfiguration (#321) (@strager)

1.2.0.0

• Parse config from initializeOptions and pass in the old value of config to onConfigurationChange (#285) (wz1000)
• Break up big TVar record into lots of small TVars (#286) (@wz1000)
• Add some INLINE pragmas (@wz1000)
• Make method equality work for CustomMethods (@wz1000)

1.1.1.0

• Don't send begin progress notification twice (@wz1000)

1.1.0.0

• Fix prepareRename reponse and prepareProvider (@kirelagin)
• Fix deriving instance of MonadUnliftIO (@banacorn)
• Add support for file and folder operations in WorkspaceEdit (@banacorn) Instead of having TextDocumentEdit in WorkspaceEdit

data WorkspaceEdit =
  WorkspaceEdit
    { _changes         :: Maybe WorkspaceEditMap
    , _documentChanges :: Maybe (List TextDocumentEdit)
    } deriving (Show, Read, Eq)

It is now replaced by a new type called DocumentChange

data WorkspaceEdit =
  WorkspaceEdit
    { _changes         :: Maybe WorkspaceEditMap
    , _documentChanges :: Maybe (List DocumentChange)
    } deriving (Show, Read, Eq)

Which is just a synonym of union of WorkspaceEdit and other operations

type DocumentChange = TextDocumentEdit |? CreateFile |? RenameFile |? DeleteFile

• Add new CodeAction features (isPreferred, disabled) (@pepeiborra)
• Respond to requests with missing handlers (@wz1000)
• Use Text over String in more places (@wz1000)
• Add missing lenses (@wz1000, @bubba)

1.0.0.0

1.0.0.0 is a major rework with both internal and external facing changes, and will require manual migration.

• The package has been renamed from haskell-lsp to lsp, and similarly for haskell-lsp-types to lsp-types
  • Because of this, all modules are now exported from Language.LSP.X rather than Language.Haskell.X.
• Both lsp and lsp-types have been reworked to be much more type safe
• The 3.15 specification should be fully supported now. If you find anything in the specification that isn't in lsp-types, please let us know
• The Capture module has been removed as it will be reworked later on and moved to lsp-test
• lsp can now handle dynamic registration through the registerCapability and unregisterCapability functions

### Type safety

There are three types of concrete messages, NotificationMessage, RequestMessage and ResponseMessage. They are parameterised by their Method, which determines what type their parameters or response result must be.

data RequestMessage (m :: Method f Request) = RequestMessage
    { _jsonrpc :: Text
    , _id      :: LspId m
    , _method  :: SMethod m
    , _params  :: MessageParams m
    }

A Method in turn is parameterised by whether it originates from the client or the server, and whether it is used for notifications or requests:

TextDocumentFoldingRange           :: Method FromClient Request
TextDocumentSelectionRange         :: Method FromClient Request
WindowShowMessage                  :: Method FromServer Notification
WindowShowMessageRequest           :: Method FromServer Request

Each Method also has a singleton counterpart which allows it to be used at the term level, for example in RequestMessage._method:

STextDocumentFoldingRange           :: SMethod TextDocumentFoldingRange
STextDocumentSelectionRange         :: SMethod TextDocumentSelectionRange

SWindowShowMessage                  :: SMethod WindowShowMessage
SWindowShowMessageRequest           :: SMethod WindowShowMessageRequest

The type families MessageParams and ResponseResult map each Method to the appropriate type to be used in a response:

ResponseResult TextDocumentRename            = WorkspaceEdit
ResponseResult TextDocumentPrepareRename     = Range |? RangeWithPlaceholder

Also new is the |? type which represents union types in TypeScript, and is used throughout the specification where a field can accept several different types.

As an example of this in action, the types of your handlers will now depend on whether or not they are a request or a notification. They will pass along the precise type for the parameters the method you are handling, and in the case of a request handler, will expect that the response you give back is of the correct type as well.

type family Handler (f :: Type -> Type) (m :: Method from t) = (result :: Type) | result -> f t m where
  Handler f (m :: Method _from Request)      = RequestMessage m -> (Either ResponseError (ResponseResult m) -> f ()) -> f ()
  Handler f (m :: Method _from Notification) = NotificationMessage m -> f ()

LspT

LspFuncs has been removed and instead functionality is exposed through functions in the MonadLsp class.

getVirtualFile :: MonadLsp config m => NormalizedUri -> m (Maybe VirtualFile)
sendRequest :: forall (m :: Method FromServer Request) f config. MonadLsp config f
            => SServerMethod m
            -> MessageParams m
            -> (Either ResponseError (ResponseResult m) -> f ())
            -> f (LspId m)

It is parameterised over the server's LSP configuration type and the underlying monad. We recommend that you build your own monad for your server on top of the LspT transformer, so it will automatically become an instance of MonadLsp.

Inside the new ServerDefinition data type which gets passed to runServer, you need to specify how to convert from IO to your monad and back in interpretHandler so that lsp can execute your monad inside the handlers. You can use the result returned from doInitialize to pass along the LanguageContextEnv needed to run an LspT, as well as anything else your monad needs.

type 
ServerDefinition { ...
, doInitialize = \env _req -> pure $ Right env
, interpretHandler = \env -> Iso 
   (runLspT env) -- how to convert from IO ~> m
   liftIO        -- how to convert from m ~> IO
}

Steps to migrate

1. In your .cabal file change any haskell-lsp dependencies to lsp
2. Replace your existing imports with Haskell.LSP.Server
3. If necessary define your own monad and fill in interpretHandler
4. Migrate your handlers to use notificationHandler and requestHandler, passing along the corresponding SMethod (See example/Simple.hs)
5. Remove any storage/use of LspFuncs and instead call the corresponding functions directly from your monad instead of IO

0.23.0.0

• Add runWith for transporots other than stdio (@paulyoung)
• Fix race condition in event captures (@bgamari)
• Tweak the sectionSeparator (@alanz)
• Add hashWithSaltInstances (@ndmitchell)
• Fix CompletionItem.tags not being optional (@bubba)
• Avoid unnecessary normalisation in Binary instance for NormalizedFilePath (@cocreature)
• Fix ordering of TH splices (@fendor)

0.22.0.0

• ResponseMessage results are now an Either type (@greenhat)
• Support for GHC 8.10.1

0.21.0.0

• Stop getCompletionPrefix from crashing if beforePos is empty
• Add DidChangeWatchedFilesRegistrationOptions
• Add NormalizedFilePath from ghcide
• Add diagnostic and completion tags
• Fix language server example
• Correctly fix the problem with '$/' notifications
• Add azure ci

0.20.0.1

• Fix Haddock generation syntax error

0.20.0.0

• Force utf8 encoding when writing vfs temp files
• Don't log errors for '$/' notifications (@jinwoo)
• Force utf8 encoding when writing vfs temp files (@jneira)
• Store a hash in a NormalizedUri (@mpickering)
• Move "Semigroup WorkspaceEdit" instance (@sheaf)
• Fix vfs line endings (@jneira)

0.19.0.0 -- 2019-12-14

• Fix vfs line endings (@jneira)
• Fix typo in .cabal (@turion)
• Normalize file paths before converting to Uri's (@jneira)
• Fixes to persistVirtualFile (@mpickering)

0.18.0.0 -- 2019-11-17

• Explain the use of NonEmpty in documentOnTypeFormattingTriggerCharacters (@bubba)
• Fix response type for CodeLensResolve, add the ContentModified error code (@SquidDev)
• Virtual file fixes, removing race conditions and other cleanups (@mpickering)
• Add missing fmClientPrepareRenameRequest to MessageFuncs export (@alanz)
• Make explicit GHC 8.6.5 stack file (@alanz)
• Rework Core.Options and infer all server capabilities from handlers (@bubba)
• Generate lenses for WorkDoneProgress data types (@alanz)

0.17.0.0 -- 2019-10-18

• Update progress reporting to match the LSP 3.15 specification (@cocreature)
• Fix progress cancellation action being retained (@mpickering)
• Respect both codeActionProvider and codeActionHandler in server capabilities (@fendor)
• Ensure ResponseMessage has either a result or an error (@cocreature)

0.16.0.0 -- 2019-09-07

• Add support for CodeActionOptions (@thomasjm)
• Add support for textDocument/prepareRename request (@thomasjm)
• Fix diagnostic code parsing (@thomasjm)
• Fix shutdown response type (@bubba)
• Relax base constraints for GHC 8.8 (@bubba)

0.15.0.0 -- 2019-07-01

• Fix decoding of ResponseMessage to account for null messages (@cocreature)
• Normalize URIs to avoid issues with percent encoding (@cocreature)
• Changed the initial callbacks type to also capture initial config (@lorenzo)
• Improved documentation (@bubba)

0.14.0.0 -- 2019-06-13

• Add support for custom request and notification methods (@cocreature)
• Use attoparsec to parse message headers incrementally (@cocreature)
• Only build lsp-hello when -fdemo flag is set (@bubba)

0.13.0.0 -- 2019-05-18

• Fix relative posix URIs (@DavidM-D)
• Make sure that markedUpContent always starts on a newline (@alanz)

0.12.1.0 -- 2019-05-08

• Bring over functions from @mpickering's hie-bios. So LspFuncs now includes

    , persistVirtualFileFunc       :: !(J.Uri -> IO FilePath)
    , reverseFileMapFunc           :: !(IO (FilePath -> FilePath))

• Fix exception on empty filepaths

• Migrate some utility functions from haskell-ide-engine, for the benefit of other language servers.

  • rangeLinesFromVfs
  • PosPrefixInfo(..)
  • getCompletionPrefix

• Remove HoverContentsEmpty. It is unnecessary, and generated illegal JSON on the wire.

0.12.0.0 -- 2019-05-05

• Added A NFData instance for Diagnostics (@DavidM-D/@ndmitchell)
• Switch to using the rope-utf16-splay library for ropes (@ollef)

0.11.0.0 -- 2019-04-28

• Add support for cancellable requests within withProgress and withIndefiniteProgress
• Align withProgress and withIndefiniteProgress types to be in IO like the rest of the library. (Look at using monad-control and unliftio if you need to use them with a Monad transformer stack)

0.10.0.0 -- 2019-04-22

• Add withProgress and withIndefiniteProgress functions for sending window/progress notifications.

0.9.0.0

• Add MarkupContent to HoverResponse, and (some) json roundtrip tests.

0.8.2.0 -- 2019-04-11

• Add applyTextEdit and editTextEdit helpers
• Set the typedefinitionProvider capability if it has a handler
• Add stack files for GHC 8.4.4 and 8.6.4

0.8.1.0 -- 2019-02-28

• Update Handler to delegate to typeDefinitionHandler instead of definitionHandler. by @fendor

0.8.0.1 -- 2018-10-27

• Support GHC 8.6.1 by loosening constraints. Via @domenkozar

0.8.0.0 -- 2018-09-08

• Update Hover to be a nullable according to spec
• Move Lenses into a separate module, Language.Haskell.LSP.Types.Lens

0.7.0.0 -- 2018-08-14

• Update CompletionItem
• Add commitCharacters field
• Add MarkupContent option for documentation
• Add preselect field
• Add CompletionContext
• Add new server capabilities
• Add workspace folder support
• Add document color and color presentation
• Add folding range support
• Add goto type support
• s/TH/Types/g
• Move all types into haskell-lsp-types
• Hide Language.Haskell.LSP.TH.DataTypesJSON - Use Language.Haskell.LSP.Types instead
• Add lenses for Language.Haskell.LSP.Types.Capabilities

0.6.0.0 -- 2018-08-06

• Add new DocumentSymbol type and heirarchal support
• Rename CommandOrCodeAction to CAResult
• Add handler for 'textDocument/implementation' request from client
• Bump stack resolvers for lts 11 and lts 12

0.5.0.0 -- 2018-08-03

• Update Command.arguments to match specification
• Update ClientCapabilities to v3.10
• Add MarkupContent
• Add new CompletionKinds
• Add new SymbolKinds
• Add preset version capabilities

0.4.0.0 -- 2018-07-10

• CodeAction support as per v3.8 of the specification, by @Bubba
• Update VersionedTextDocumentIdentifier to match specification, by @Bubba

0.3.0.0

• Handle TextDocumentSync fallbacks with new TDS type.

0.2.3.0 -- 2018-99-99

• GHC 8.4.3 support
• Apply changes to the VFS in the order received in a message. This fixes vscode undo behaviour. By @Bubba
• Introduce additional error codes as per the LSP spec. By @Bubba
• Add preliminary support for recording LSP traffic for later playback in test scenarios. By @Bubba

0.2.2.0 -- 2018-05-04

• Make Diagnostic relatedInformation optional, as per the LSP Spec. By @Bubba.

0.2.1.0 -- 2018-05-02

• Support GHC 8.4.2
• Split into two packages
• Language.Haskell.LSP.TH.DataTypesJSON becomes Language.Haskell.LSP.Types
• Diagnostic now has _relatedInformation. Can default it to mempty. via @AlexeyRaga
• Correct the name of the DidChangeWatchedFilesParams field, by @robrix
• Make sure to escape URIs properly for Windows file paths Fixes #75. Also added a couple of pretty dumb tests!, by @johnsonw

0.2.0.1 -- 2017-12-27

• Built with LTS 10.1 (stack)
• Don't escape semicolons after drive letters by @nponeccop
• Add Foldable and Traversable instance to List by @noughtmare

0.2.0.0 -- 2017-11-23

• Major changes as implementation continued. Now seems stable, used in haskell-ide-engine

0.1.0.0 -- 2017-07-19

• First version. Implements version 3 of the Microsoft Language Server Protocol